Crushing/Grinding
SUPER COARSE
FEATURES
- Extremely large feed opening enable lumpsize crushing 〈up to 540mm〉.
- It simplifies and economizes crushing plants due to its large crushing capacity and high crushing ratio.
- The hydraulic unit provides very easy discharge set adjustment. Discharge setting is displayed on the set indicator.
- Long service life is assured by spherical bearing incorporated at main shaft top.
- Trouble-free operation is provided by protective inter-lock circuit incorporated in the control panel.
MODEL AND CAPACITY
| Model | Nominal Size (MAX. FEED SIZE mm) |
Motor (kW) |
Capacity(mt/h) | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Discharge Setting(O.S.S mm) | ||||||||||||
| 25 | 30 | 35 | 40 | 45 | 50 | 60 | 70 | 80 | 90 | |||
| KG2910 | 290×1000 (300×210×150) |
75～110 | 140 | 160 | 170 | 190 | 204 | 220 | ||||
| KG3310 | 330×1000 (350×245×175) |
75～110 | 200 | 210 | 230 | 250 | 280 | |||||
| KG3512 | 350×1200 (370×260×185) |
110～150 | 220 | 240 | 260 | 280 | 300 | 350 | ||||
| KG4012 | 400×1200 (430×300×215) |
110～150 | 300 | 320 | 350 | 400 | 440 | |||||
| KG4013 | 400×1350 (430×300×215) |
150～190 | 270 | 300 | 320 | 350 | 380 | 430 | ||||
| KG4513 | 450×1350 (480×340×240) |
150～190 | 400 | 430 | 490 | 540 | ||||||
| KG4515 | 450×1500 (480×340×240) |
170～220 | 330 | 360 | 410 | 440 | 500 | 560 | ||||
| KG5015 | 500×1500 (540×380×270) |
170～220 | 450 | 500 | 560 | 630 | 690 | |||||
| KG5516 | 550×1600 (600×430×300) |
190～270 | 540 | 590 | 680 | 760 | 840 | |||||
| KG6018 | 600×1800 (650×460×325) |
220～300 | 690 | 790 | 880 | 980 | 1080 | |||||
- Note1. Capacity shown is based on continuous choke feed of typical limestone or similar with a bulk density of 1.6 metric ton per cubic meter, minimum clay and moisture.
- Note2. Actual capacity may vary due to characteristics and conditions of feed material(such as compressive strength,size distribution,etc.).