Crushing/Grinding
Gyratory Crusher (KG model)
FEATURES
- Simple Discharge Set Adjustment
- The discharge setting is adjusted by the amount of oil in the hydraulic cylinder installed at the bottom of the main shaft．
- Preventing the Main Shaft from Falling Down
- If a large hard ore enters the crushing chamber, the main shaft may develop a jumping action.To prevent the main shaft from falling down, the hydraulic support for the main shaft is maintained by raising a piston within balance cylinder which contains air and oil．
- Capable of Re-starting While Loaded
- If the crusher has stopped during the crushing operation．It is necessary to remove the raw material from the crushing chamber．Thanks to the hydraulic system, ores in the crushing chamber can be discharged by lowering the crushing head for immediate re-starting.
- Heavy Duty Spider Bearing
- Large spherical bearing is equipped as spider bearing for receiving large crushing load and long life.
MOVIE
MODEL AND CAPACITY
| Model | Feed Opening (mm) |
MAX. FEED SIZE (mm) |
MOTOR (kW) |
Capacity(mt/h) | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Discharge Setting(O.S.S mm) | |||||||||||||||||||||
| 90 | 100 | 110 | 120 | 130 | 140 | 150 | 160 | 175 | 190 | 205 | 220 | 235 | 250 | 265 | 280 | 295 | 310 | ||||
| KG-09515 | 950× 2500 |
650× 900× 1300 |
150～ 280 |
(640) | 760 | 880 | 970 | 1070 | 1160 | 1250 | 1340 | 1450 | 1560 | ||||||||
| KG-10516 | 1050× 2800 |
700× 1000× 1400 |
175～ 320 |
(780) | (900) | 1020 | 1140 | 1250 | 1360 | 1470 | 1580 | 1710 | 1850 | 1980 | |||||||
| KG-11517 | 1150× 3100 |
800× 1150× 1600 |
200～ 360 |
(1080) | 1200 | 1320 | 1430 | 1540 | 1640 | 1730 | 1880 | 2030 | 2160 | 2300 | |||||||
| KG-12518 | 1250× 3300 |
900× 1250× 1800 |
230～ 410 |
(1280) | 1400 | 1520 | 1630 | 1740 | 1840 | 1950 | 2100 | 2270 | 2440 | 2600 | |||||||
| KG-13519 | 1350× 3600 |
950× 1350× 1900 |
260～ 450 |
(1430) | (1550) | 1670 | 1790 | 1920 | 2050 | 2170 | 2350 | 2530 | 2710 | 2900 | 3080 | ||||||
| KG-15522 | 1550× 4100 |
1100× 1550× 2200 |
350～ 600 |
(2100) | 2260 | 2420 | 2580 | 2750 | 2910 | 3150 | 3390 | 3630 | 3880 | 4120 | 4360 | ||||||
| KG-15525 | 1550× 4100 |
1100× 1550× 2200 |
460～ 780 |
(2720) | (2920) | 3130 | 3340 | 3550 | 3760 | 4050 | 4370 | 4670 | 4980 | 5280 | 5600 | 5900 | |||||
| KG-15026 | 1500× 4000 |
1050× 1500× 2100 |
510～ 850 |
(3160) | 3390 | 3610 | 3840 | 4070 | 4380 | 4730 | 5050 | 5390 | 5710 | 6060 | 6380 | 6710 | |||||
| KG-16529 | 1650× 4400 |
1160× 1650× 2330 |
650～ 1050 |
(3930) | (4210) | 4490 | 4780 | 5060 | 5450 | 5880 | 6280 | 6700 | 7100 | 7540 | 7940 | 8340 | 8750 | 9150 | |||
- Note1. Capacity shown is based on continuous feed of typical limestone or similar with a bulk density of 1.6 metric ton per cubic meter, minimum clay and moisture.
- Note2. Actual capacity may vary due to characteristics and conditions of feed material(such as compressive strength,size distribution,etc.).
- Note3. For operation in parentheses condition,consult EARTHTECHNICA.