Recycling
MULTI PRESS MAX
Ring die pelletizing machine
FEATURES
- This is a pelletizing machine with a heavier frame structure compared to competitor machines.
- The electrical costs per capacity are cheaper than screw-type molding machines.
- You can anticipate greater sales channels for the small-diameter RPF compared to large-diameter ones.
- When processing waste plastics, external heating is not required because heat is adequately generated by the passing resistance at the die hole.
- The rotating shaft and spindle are supported by four bearings, enabling a structure that suppresses shaft vibration.
- The spindle is equipped with a hydraulic safety device, which prevents the spindle from rotating and imparting excessive force on the body in the unlikely event that it bites into foreign matter.
- The front door is hinged so that it can be fully opened, and is a double door. For that reason, the door can be opened and closed regardless of the cutter position.
MODEL AND CAPACITY
| Model | Die Dimensions (mm) |
Product size(mm) | Capacity(t/h) | Motor(kw) |
|---|---|---|---|---|
| MPV 0600K | 650 | 6-20 Cylindrical |
0.3 - 0.5 | 90 - 150 |
| MPV 1600K | 850 | 0.5 - 1.5 | 180 - 220 | |
| MPV 2400K | 880 | 1.5 - 2.5 | 320 - 400 | |
| MPV 3000K | 1000 | 2.0 - 3.0 | 400 - 500 |
- Note1. Processing capacity varies depending on the raw material characteristics.